The Hub

Hi guys, it's my first post here. First of all, english is not my first language, so I'm sorry for any mistake or its a bit rough. Recently I have a Sterling Maj200xsm from a costumer that has tunning issues with the tremolo. Any of you has experience with this model? I made a full set up and I checked the nut, saddles, springs, and dont found the trouble. Sometimes there are no issues at all, then the 2º and 3º string goes higher, then…

I am a retired dentist. One saying we had was, “You can’t fix what you can’t see.” And another was, “The day you start working with magnification will be the best and worst day of your practice.” The worst because you will see what you have been missing, and the best because you will never miss it again. So even though I have my Dan E. Model visor loupes, and my retired dental loupes on throughout the day, sometimes, it’s not enough. I pi…

Dialled in the Beta, much further. Now at v1.1.0 Echoing Christopher Alexander’s argument in the first half of “Notes on the Synthesis of Form” here. Parametric, Semi-Lattice Structures. Centres within Centres, interacting to form the whole. A living structure. Because of the dimension of time, and feature hierarchy, and methodology we end up with a Centre Oriented Semi-lattice Hyper-graph, or COSH for short. This will be available on the…

Rask Guitars — Utah (relocation required) Rask Guitars is a Utah-based custom shop dedicated to building exceptional instruments — primarily high-end acoustics, alongside electric guitars and prototypes. We operate with a small, focused team where craftsmanship isn't just a standard, it's the entire point. We're growing, and we're looking for a skilled, experienced luthier who's ready to plug into a real production environment, contribute…

Hi all! I was wondering if anyone knew how to source a Stelling tailpiece or knew of what would fit? I have a White Star model that came in with one that's broken. I tried their website and I just get errors and I understand Geoff Stelling retired a few years back. Images

A visual dependency map for Autodesk Fusion. It turns complex Fusion designs into an interactive map of model logic, helping users understand how parameters, sketches, construction references, features, bodies, and other design elements relate to each other. Instead of digging through dense timelines, browser trees, and feature chains, Node Atlas gives users a readable graph of how a design is connected. It is built for designers, builder…

I have a "fender", which I believe is a knock off, in my shop. I didn't immediately catch that it was a fake, but as I worked on it it's become fairly undeniable, in my opinion. For the neck — the fretboard is made from two pieces of rosewood, the headstock decal doesn't look right, the truss rod is metric, the tuners don't look like a MIA Fender, and there's no walnut plug on the truss access. The model name being wrong is suspicio…

Greetings fellow Looths! I recently received a request from a customer to replicate Kurt Cobains 59 Martin, starting with a Sigma DM3. I have pasted the customers email to me below. While I have been a looth hobbyist for many years, I just recently opened my official business, Finger Lakes Guitar Works, and am just getting off the ground and a good flow of repair work is already coming in. While I feel 100% confident in my abilities to…

Hi - I’m purely a hobbyist, learning to rewire a stack of thrift shop guitars that I’ve rescued. Today’s project is an old TEISCO student model and the pickups have three wires. Green is grounded to the base. Red and black both wrapped against the coil. I know what to do with the ground and with one hot wire. What do I do with the second hot wire (red or black)? Thanks for helping a newcomer.

I’ve been speed modelling parts with the printer running 24/7 since inception. There are currently somewhere around 75-100 individual pieces modelled in my source file. Mostly only building on what I’m considering the X axis, but it’s Freeform so I’ve used them to build out Y.. anyways… Connectors, Extenders, Couplers, Links, Sleeves, Feets, Plugs, Panels, Hooks… and on and on. In a moments time, I will have a mass drop folder of Standar…

I had a vintage Gretsch semi hollow come through the shop this week and it's left me with some questions. First off identifying the instrument's model has been a trick so far. The only information I can find is that is was likely built in and around the early 50's Second, it's in need of a neck reset. I'm not particularly well versed in resets for hollow and semi hollow guitars, especially one of this age and design. I'm very curious…

Great Tool. Great Benchy. Testing Threads, Sliding Dovetails, Overhangs, and it’s actually useful instead of that boat.. so testing wear resistance too. igus iglidur I151 Thanks for the model @member

I did a pretty big update to my web tools last week. These are updated from the older versions I had up on celestialinstruments.com. There’s an updated FFT tool now, plus mode detection for guitars and plates, wolf note detection, played-note energy transfer, monopole mobility, plate thickness calculation, and 1/2/3/4 DOF modeling that can be prefilled from FFT data. The part I’m most excited about is being able to fit a measured guitar re…

https://www.instagram.com/reel/DWAuW40jAR_/?igsh=MW1jNDdoYzllMGFmMA== I’ve spent a few overly caffeinated days bouncing between modelling environments, different combinations of operations, tools.. subtle differences in how the coffee is brewed. In short… • Building Iso Curves in Sketch. Defining the surface structure and flow • NURBS Surfacing from curves, smooth intentional surface topology. • BRep Face to T-Spline in Form Environment. Org…

Back at tinkering with the new Isoparametric Curve tool in Fusion. Scroll down to PICTURES LETS GO! If you want to skip this little walk through Autodesk Fusion memory lane, clearing up some of the UI conFusion. Why something so seemingly basic, is just being added today. 2009- Autodesk Inventor, hybrid modelling experiment, parametric and direct CAD in one hybrid system. 2011- Autodesk acquires T Splines Inc. an organic modeller still in…