The Hub

I've got a client with a '72 Tele. It needs a re-fret, but the truss rod isn't functioning. In fact it's backed out of the channel significantly, and there's a bulge in the neck underneath the first fret which suggests to me there's something going on with the truss rod anchor. The puzzling thing is the wood in the neck has bulged, but the skunk stripe and the finish don't appear to be disturbed at all. I'm thinking I'll probably hav…

Since most of us fix or make guitars, we have probably heard something about the cease and desist letters Fender has sent out concerning the Stratocaster. I thought I would offer some thoughts. As always, caveat emptor. There are three basic ways to protect intellectual property under Federal law. Patent, trademark, and copyright. Each protects different things, and has different underlying legal theories. Lets begin with pate…

Hello all, got a problem in a telecaster I rewired that has me in a twist. The basics: friend has a 2001 US Standard telecaster (left handed not that it matters). He bought it used and says it was quiet initially. A few years back he grabbed the pickups out of it and moved them to a new tele body with a torrefied maple neck he preferred. Recently he upgraded the new build with a Lollar CC tele set, and asked me to reinstall the original…

Hi -- I am planning to have a maple Thinline Tele top painted by an automotive paint shop. They've made a glossy and a matt sample for me and it looks great. I wonder if anyone has any experience with this, and specifically: - if I bind the top first, will the paint stand very proud above the binding once I scrape the paint off the binding? - the matt looks terrific, but it looks like it will burnish and get shiny in spots or line…

Three evertune installs for this customer. This red tele looks great. Lots of tonal options with the DT Fluence set. https://www.instagram.com/reel/DVG-vEhkbDI/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== https://www.instagram.com/p/DVG-TLIEbWL/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==

Hey all! Anyone know what lacquer pigment might better match the deep black colour of this tele body? It’s an American tele deluxe with a nitro finish. Photos show: Finish damage was the size of a quarter. I’ve filled and levelled the area and sprayed on coat of Oxford black nitro. I poured a puddle of naphtha on to check the match and unfortunately no dice. I’ve used Oxford black many times for overspray during repairs and have always fo…

Hello -- I am trying to joint a Tele-style mahogany neck blank. I have a Metabo planer in good condition, but no jointer. I secured the c. 40 mm thick blank to a flat plywood sled and shimmed it well. It's hot-glued in place, and absolutely no rocking from any corner or edge. But as I plane it down, I still have about 1 mm difference from one end of the blank to the other when I put a straightedge on the surface (see photo, with backlig…

First time here on the forums, not sure how often I'll check in, but thought this the best place to post it. Was playing with an idea proposed by Buck Van Laarhoven on a parametric model for bolt-on neck shims, and found the formulas I wrote up translated easily to Taylor and conventional acoustic neck joints so decided to add boxes for those as well. I'm not well versed in Google Sheets, but couldn't see a way to upload the file direct…

Hi -- I'm building a Thinline Tele and accidentally over-planed the mahogany neck blank. It is now 18.7 mm thick on avg and my rosewood fingerboard is 5.95 mm -- for a total of 24.65 mm instead of the recommended 25.4 mm (1 inch). So the total thickness will be thinner by 0.75 mm or so. 1. Am I still within practical tolerance and therefore should just go ahead with the build as normal? 2. Should I try gluing a 0.55 mm maple veneer I hav…

Hey all, I could use some help with wiring up my telecaster. I'm fully aware this might be weird, but I thought it'd be a fun side project. So to get to it, first is the pickups. I plan on having a Staple P90 in the neck, a bill paisley secret agent pickup in the middle, and a normal tele pickup in the bridge. I'd like to have it wired mostly normal on a 3 way switch, where it's Neck, Neck + Bridge, Bridge. I'd also like the Neck P90 to…

Hey everyone, I just had a Tele clone built by a small builder in my Proper's Guitar Workstation for a new nut and a fret level. It was clamped down in the workstation for less than a day. I just noticed that the rear hold down clamp left its footprint in the finish. No, I don't know what type of finish the builder used, but I'm trying to find out. I'm thinking its not nitro or poly because I use my TVPGW everyday and this has never hap…