The Hub

I need some suggestions from the many great repair senseis out there.The customer is fine with a structural repair and not concerned about making it invisible. I told him you will see anything I do. He was fine with that and has a budget of between $700-1000. It's a clean break. nothing missing, It closes tightly.. I was thinking either 1) the generic double splines one on either side of truss rod and touchup as best I can. Or 2) the ab…

Hey all, I have a Guild JF30 in my shop that needs some sizeable touchups. The goal is to get this looking better, not necessarily perfect. I'm not particularly good at refinish work and this guitar has some rather sizeable dings. Any general suggestions on getting this to look better? There are four major locations that I'm concerned with. The headstock, the back of the neck, the ding in the lower bout of the guitar, and the mark in the…

This is just a rant against the Stew-mac touchup pens. Ive just never had them functionally work, without creating more of an issue than there was in the first place. Through an "act of god" I chipped a small bit of freshly buffed and polished laquer off the headstock of a Taylor that I refinished. The guitar had that nasty bubbling around the tuners and CA glue didn't fix the issue, so I stripped the front of the headstock and airbrush…

Ok. Did a refret on a MIM Fender Strat maple neck. Some of the finish came off (was careful AF but....) It is not lacquer but I assume a poly finish. New lacquer did not meld. Can/should I use a tinted CA fix? Any tips, color recipes? Any help would be appreciated. VERY appreciated. Thanks -Mike

I'm wondering if people have advise on ways to be productive when having to work in multiple locations. Particularly curious about tool organization and portability strategies. I share one shop about 45 minutes from home, but also do some work from home. Mostly repair and setup stuff at home and building/more involved repairs at the shop. Some tools and supplies are simple enough to have multiples of, but for others it gets really expens…

We had a Martin 1997 DM come in with all the binding falling off. Got that all glued back on and it needed some minor finish touchup down on the lower bout. This clouded like typical moisture blush does, but doesn't behave like typical blush. We can't sand it off, can't buff it off, thinner and butyl cellosolve (blush remover) both cause it do dissipate while it's wet, but as soon as it cures back out, the blush returns. Tem…