The Hub

I've built a number of classical guitars with an adjustable neck and they seem to gather quite a bit of interest, so i'm currently in the process of looking to refine the design and build. It's quite a simple construction where the neck is held together by string tension and hangs on a pivot. I developed a 3d printed "socket" which acts as the interface between the body and the guitar and allows for some fine tuning of the alignment of t…

Hello, One of my commissions is coming down the pike and it's going to be my first time using bar frets. I could use a once over for any helpful tips if you have any. About the guitar: Aged HD-28 but mahogany back and sides. I think Martin called this a HD-28 M? Skipping the truss-rod and using two carbon fiber strips. My process for Frets: 1: I CNC my fingerboards to a 16" radius and for T-frets I use a .023" to cut slots with a mat…

Hi folks, I thought you might be interested in this approach to having easy height adjustment for a GoBar deck. I learned this tip from my buddy, Don Parker. He lurks around here too from time to time. :) The basic idea is rather than having a booster platform on the base for use when gluing braces to plates you bring the roof down lower. There is a 3D printed spacer in black in the pics. I linked to a downloadable STL and 3MF of…

Hi everyone - I recently ran into trouble making new nut for one of my necks that needed to be trued and re-fretted. I roughed in the nut as usual and then, with the bass guitar fully assembled and strung up, I started cutting the slots to depth. I use the StewMac digital nut slot depth gauge and have had good results in the past. I marked the nut's lowest points (radiused) using the guitar nut scribe tool (first time using this!) and c…

I'm reading the Design book of the Gilet/Gore set (2nd Edition) and ran across something that surprised me. Under "Top bracing layout - guidelines" (Section 4.4.8, pp 4-52) Gore writes, "Brace ends that are housed into the linings stiffen the edge of the soundbard considerably and so constrain its mobility. Unless you are chasing a particular effect, it is generally not very beneficial to house the lower bout braces into the linings." My…