The Hub

Good morning everyone, I was taking some measurement on production necks with scarf-joint (13° headstock angle) to add some machining process with the cnc. I so recreated the standard neck blank feature (100mm wide and 20mm thick), then drawed the 13° angle. Everything correspond the to the real piace but two measurement: the startingcut behind the break angle is ''off'' by 20mm +/- as well as the cut on the bottom, still off by 20mm…

Hi Everyone, I believe this may be my first post here, so just a quick introduction — I’m Andrew in Milwaukee, WI. I’ve been building a few years. My luthier eyes were opened first by Charles Fox in Portland which led me to the Gallop School. I recently retired from a tech career and I am now based in Milwaukee, WI focusing on acoustic builds. I’m currently exploring wood-body resonator guitars, and I’d love to learn more from t…

I'm reading the Design book of the Gilet/Gore set (2nd Edition) and ran across something that surprised me. Under "Top bracing layout - guidelines" (Section 4.4.8, pp 4-52) Gore writes, "Brace ends that are housed into the linings stiffen the edge of the soundbard considerably and so constrain its mobility. Unless you are chasing a particular effect, it is generally not very beneficial to house the lower bout braces into the linings." My…

I was finally able to model something like a Gibson L7 top plate! Now I'm trying to build my f-holes... My only reference is the Benedetto archtop book, where it puts a few rules of thumb about how the f-holes should be placed. My question is, how precise are we talking here? One of the rules of thumb is that the bridge intersects at the midway point of the f-holes. Does this imply that the f-holes are at a certain location on the plate,…

Good morning everyone. Looking for some help finding/achieving a color. I have a customer that wants an Olive Drab Translucent matte finish. I usually just do nitro matte finishes over natural or stained woods, or the occasional oil rubbed finish. Colors are not something I’ve messed with too much yet. I have found some nitro that is opaque OD, but am having a hard time sourcing something non-opaque that will still get dark enough. Ref…

Hello, I am trying to copy the traditional SG cherry finish on a clone I built (not for sale) where the grain of the mahogany appears to be filled with an ebony or black stain. Similar to the finish that Collings refers to as doghair but not as pronounced as that. It appears the grain is filled or stained or grain-filled with a dark color, sanded back and then the primary color goes over the top of that. Does anyone have experience wi…