The Hub

Hey everyone, I was showing this to James Roadman on the Loothalong, and I thought I’d share it here with anyone who might find it helpful. I was installing an Anthem in a GS Mini, and I couldn’t get the microphone to fit without hitting the ballends of the strings. I had thought about placing the mic on the other side of the pins, but then I decided to use a scalpel and a small file to cut some chamfers into the corners of the mic housi…

Hello Luthiers and Guitar Builders,We manufacture and supply high-quality natural bone Guitar Nuts and Saddles in custom sizes for acoustic, electric, classical, and bass guitars.What We Offer:• Custom-sized Bone Nuts & Saddles• OEM & Bulk Orders• Precision Cutting & Finishing• High-Density Natural Bone Material• Consistent Quality• Worldwide ShippingWhether you need a single custom specification or bulk production for your workshop or…

*Photo added* Ding repair on spruce top, 2015 Collings 0002HE #23701. What are y’all reaching for when repairing dents in nitro? GlueBoost fill & finish or drop filling with nitrocellulose? This is a well-used guitar; not pristine and the owner has reasonable expectations that the repair will not be “like it never happened” Bonus question: If there is bare wood, should I seal it with shellac to preserve the color before proceeding to fil…

Hello All I have been using Ted Bergstrand's online nut calculator on Benchmuse.com which is excellent. It allows you to have a consistent gap between each strings vs the progressive gap that the Stewmac rule gives you. Or you can do consistent centers to the strings. I have definitely found measuring the nut with calipers to work a lot better than the stewmac rule and don't use the rule anymore. I wanted some additional functionality…

Any tips on handling the off-gassing for vintage guitars? I just took in a 1941 D'Angelico. The original tortoise shell pickguard is gone and has been replaced. New case as well. The frets up the neck are going to need to be cleaned. But are there any other precautions I should tell the client to take? Anything I should take into account? -Mike

Gibson Roy Smeck Radio Grande 7 string! in for tuner replacements... Currently has faulty original grovers, wants waverly titanium that I'd have to modify the plate shape to fit---and drill a new lower hole mount to avoid new holes drilled in the headstock ( around the "e" in waverly logo; and new plate hole and old plate hole would intersect by a whisper ). I'd have to remove the cog to mill & install, but the mounting screw head has c…

Hey Looths, I have a 1980 Guild 12 string in the shop and while doing a preliminary examination I noticed this odd discoloration inside of the guitar. My immediate thought was water damage, although it hasn't bled through to the outside of the guitar and lifted the finish. I also thought of glue smear but I can't quite tell. Any thoughts here?

At what point do you tell a customer that their acoustic instrument needs a bridge reglue? Do you do it when the corners are just barely starting to lift? Once it has begun to affect playability/tuning stability? Do you offer half-measures to save them money when the damage is not too bad (dripping in some thinned tite bond instead of removing the bridge entirely for example)? I ask this because a Godin acoustic bass just came across my…

I've got a client with a '72 Tele. It needs a re-fret, but the truss rod isn't functioning. In fact it's backed out of the channel significantly, and there's a bulge in the neck underneath the first fret which suggests to me there's something going on with the truss rod anchor. The puzzling thing is the wood in the neck has bulged, but the skunk stripe and the finish don't appear to be disturbed at all. I'm thinking I'll probably hav…

Hello! A client of mine have given up on the idea that he'll make good use of this Gibson and Fender stash. He willing to entertain separating items and is open to offers. No idea how to value this lot... Please call or text 1-765-729-5282 if you have questions or offers. Located in between Indianapolis and Fort Wayne Indiana. As I understand it, getting NOS Gibson headstock veneers can cost and arm and a leg these days... The headstock ve…

When using epoxy (either silvertip or epoxy), I try to sand back the epoxy on the surface and only leave it in the pores. I'll start the process with sanding to 320g or so then using an air compressor to blow out the pores. The challenge that I run into is opening new pores in the process. I use a block of wood and long strokes in an attempt to avoid uneven sanding. Ultimately I'll get a good pore fill but I tend to apply several coats…

I'm looking the name and source for the rubber material found on the jaws of the Stewmac pattern makers vise and the Proper Work Station. Not having good search luck Thanks.

Is there a way to see recent zoom meeting recordings or an index of links to the unlisted YT? Thanks.

https://www.reddit.com/r/BambuLab/comments/1v7eiwk/modular_workspace_organizer_with_an_adjustable/