The Hub

@member @member Starting the discussion here to get the planning underway. I am presenting at Cremona next year, so I thought I would use the opportunity to do a dry run during this event. Topics - 1. Modeling and 3d Printing Simplified for Guitar Repair Barbarians. 2. Touching up Martin Mahogany. 3. Color and Material Theory Simplified for Guitar Repair Barbarians.

I watched the Guild F-20 video (https://dev2.loothgroup.com/groups/repair-and-restoration/forum/topic/cracker-x-braces-on-guild-f20/#post-60310) with great interest since I've been working on a Gibson L-3 with a similar problem. A little back story - The original repair request was to address a small pickguard crack on the sound hole side. After peeking inside, I saw 5 loose brace ends on the treble side. Still a pretty standard repair…

Here is a super basic thing I just modeled and 3d printed. Small drill guides to place a 2mm hole directly centered in the side of a fretboard. I made a few sizes for different fretboard thicknesses. Seems simple but its a huge time saver.

I've seen the Elevate Luthierie jig, and it seems simple enough. One thing I don't like about their explanation video is the handwaving around "set the joint length where you want it"...feels like even with the jig, you have to do too much measuring to make it fit exactly (or within the tolerance you want) Given I can model well enough in Fusion and have a 3D printer, feels like a challenge to take on! As far as I can see, the jig is just…

First time here on the forums, not sure how often I'll check in, but thought this the best place to post it. Was playing with an idea proposed by Buck Van Laarhoven on a parametric model for bolt-on neck shims, and found the formulas I wrote up translated easily to Taylor and conventional acoustic neck joints so decided to add boxes for those as well. I'm not well versed in Google Sheets, but couldn't see a way to upload the file direct…

Anyone use a 3D scanner to make models for printing, or CNC? I've noticed a number of inexpensive scanners on the market that appear to be an able to scan with fine detail and accuracy. I've wondered if they could be used to scan a guitar neck, or arch top mandolin plate to then cut on a CNC after tweaking in a CAD program.

About: I have created an Add-On for blender that at the moment generates fret positions and makes a fretboard according to several parameters. This makes it extremely easy to get started with modeling a Guitar in blender. If you are interested it please give it a whirl and let me know what you think about it and if you like it, what you don't, what you would like to see etc... If you do like it and would like aid its development please d…