The Hub

I've built a number of classical guitars with an adjustable neck and they seem to gather quite a bit of interest, so i'm currently in the process of looking to refine the design and build. It's quite a simple construction where the neck is held together by string tension and hangs on a pivot. I developed a 3d printed "socket" which acts as the interface between the body and the guitar and allows for some fine tuning of the alignment of t…

I've owned this Jersey City made 12-string/drone 'harp' guitar for a few years and want to get on the repair. I've taken the necks off many dozens of Schmidt-made guitars but never one with two necks. I've searched the web looking for harp guitar neck removal and didn't find anything of use. Asking for any tips/aids/experience from the loothers. My plan is to make a custom neck removal jig that fits the necks, and then drill the typical…

Hey everyone, recently I've been getting more requests for neck resets from customers, and up until this point I haven't been offering them since I don't have the practical experience. I'm keen to change this, and I've borrowed my fathers Harmony H167 that has seen better days. I've done an initial cleaning and assessment, the truss rod works although I may need to force it into a backbow to have a fully adjustable neck. This shouldn't…