The Hub

Hey all, I've received a call from a woman who's husband ( and former student of Somogyi ) has recently passed, and she's looking to find anyone interested in purchasing his tonewood hoard. It appears he had intentions of building a fair amount more than he had time for here, and she's been calling around to folks hoping for some interest to no avail, so I told her I'd post here for her...She has had another local luthier compile a fair…

I had a customer ask me to take a look at this electric guitar an "amp guy" did some work on. (if you couldn't tell by the size of cap he installed 😆) Seymour Duncan hsh pickup configuration. Is there any good or logical reason one would put the north start, finish and the south finish all on the same lug of a switch? The guitar plays but has more buzz on the hb settings than the single coil. I know how to rewire it to be more... traditi…

Since most of us fix or make guitars, we have probably heard something about the cease and desist letters Fender has sent out concerning the Stratocaster. I thought I would offer some thoughts. As always, caveat emptor. There are three basic ways to protect intellectual property under Federal law. Patent, trademark, and copyright. Each protects different things, and has different underlying legal theories. Lets begin with pate…

I have a few duplicate pieces of equipment from when I worked at two different locations, as well as a couple of items I no longer need. I'm located in Exeter, NH, near the seacoast between Maine and Massachusetts. Please note that I'm not interested in shipping; pickup only. Take it easy, pat

Just sharing some info to procrastinate my nth attempt at getting this thing together. and some venting. If you get one of these in with electronic issues, estimate high. Customer brought in a Gretsch Rally in pieces that he picked up from the last repairman (who died), and just wants it to play. Minor binding repair and a weirdly-angled zero fret were relatively easy to deal with. The dead electronics are the main problem.…

Greetings fellow Looths! I recently received a request from a customer to replicate Kurt Cobains 59 Martin, starting with a Sigma DM3. I have pasted the customers email to me below. While I have been a looth hobbyist for many years, I just recently opened my official business, Finger Lakes Guitar Works, and am just getting off the ground and a good flow of repair work is already coming in. While I feel 100% confident in my abilities to…

Hi - I’m purely a hobbyist, learning to rewire a stack of thrift shop guitars that I’ve rescued. Today’s project is an old TEISCO student model and the pickups have three wires. Green is grounded to the base. Red and black both wrapped against the coil. I know what to do with the ground and with one hot wire. What do I do with the second hot wire (red or black)? Thanks for helping a newcomer.

Hi, thanks for this great resource. This is my first post here. I work on my own instruments and have little experience with advanced repairs. Recently I acquired a ca. 78 Sigma DR28H. I bought it because it sounded great and came with a pickup installed. I wanted something for open mics and gigging. With light strumming it sounded fine but I found some buzzing when I took it to a jam. I made a nut and saddle , adjusted the truss…

Hello all, got a problem in a telecaster I rewired that has me in a twist. The basics: friend has a 2001 US Standard telecaster (left handed not that it matters). He bought it used and says it was quiet initially. A few years back he grabbed the pickups out of it and moved them to a new tele body with a torrefied maple neck he preferred. Recently he upgraded the new build with a Lollar CC tele set, and asked me to reinstall the original…

I didn’t recognize the pickups. Any idea who made them? Trying to nail down the color codes Images

Does anyone have a STL for a routing template that will sit square on a les paul body? I need to cut a P90 hole into a middle position, and it would be nice to use the router, rather than chiseling the edges...

I recently picked up a used custom guitar that the seller said he bought in Vietnam Nam many years ago. I bought it as a wall hanger due to the wonderful Mother of Pearl work, especially on the back. It was very apparent that the top on this instrument was sunken at least 3/8 of an inch, as the weird bridge setup was heightened to the max and there was barely any action height. Once I took it apart and removed the foam inside, I was…

Hi guys, here’s something I’ve been working on: a fully automated, programmable pickup winder. The software is still in alpha testing and there’s still a lot to design, but this is what it looks like so far! Images

Hello estimable friends, A very long-term friend of mine left us on Christmas Eve after a long illness. His sister tasked me with evaluating, restoring, and selling his stuff. Today I'm preparing to restore a 2008 Longhorn GOM to its original EMGs. Pulling out the humbuckers I see a Pearly Gates and… what looks like an original short-magnet PAF. Correct shape brass screws for the bobbins, UV light confirms sticker and tape, tooling mark…

I have an old epiphone archtop on my bench that I am struggling to get the neck off of. I think it's a 50's Zephyr (non cutaway, single NY pickup in neck position). Anyone have any experience with these? Is the neck not a dovetail joint? I'm no stranger to neck resets but this is putting up a fight as if it's been epoxied in place.

Hello all, A customer dropped a recent American Professional II Strat to have a Double-tap humbucker installed at the bridge. I rewired the guitar following Fender's schematic (see below) and installed a stacked 250 and 500k volume pot, treble bleed PCBs and push-push coil split/tap for this pickup. All went very well, until I tried it at switch position 2. Sure enough, the new unit does not play well with the others and combining delive…

So, like an idiot, I got well into the installation of an Anthem pickup system when I realized that the soundhole braces on this guitar are effing Lincoln Logs. They're easily a quarter inch thick (and feel like basswood). Because the Anthem preamp is designed to straddle the soundhole brace, I can't fit it as-is. Anybody got any experience with this? OPTIONS THE CLIENT WOULD NEVER GO FOR (and wouldn't thrill me either): 1. Replace the bra…

Hello! I have an Ovation CP-100 pickup. Its unsoldered and I can't seem to get the pickup to work again. There wasn't a spacer either. Which doesn't make sense because if the hot is soldered to the copper strip and the ground to the housing channel, it would just ground out. Any experience getting these back together? Said pickup: https://www.sweetwater.com/store/detail/CP100--ovation-cp-100-thinline-pickup-cream -Mike