The Hub

Hi guys, it's my first post here. First of all, english is not my first language, so I'm sorry for any mistake or its a bit rough. Recently I have a Sterling Maj200xsm from a costumer that has tunning issues with the tremolo. Any of you has experience with this model? I made a full set up and I checked the nut, saddles, springs, and dont found the trouble. Sometimes there are no issues at all, then the 2º and 3º string goes higher, then…

Hi All, I wanted to check in with folks in the industry and ask for some advice. I have been on a building Hiatus for a number of years now (Hand Injury, Medical Issues). Things have gotten much better, and I am fully able and capable of building once again. The 2nd biggest hurdle I have had was a lack of opportunity for shop spaces to build. I now have a viable workspace and full use of my hands once again to build. The problem is that, o…

Hey all. I apologize if this type of post isn't allowed here but wanted to share anyway. I've been building a tool called Looth specifically for luthiers and repair techs, and I'm looking for a small group of interested looths to help shape it a bit more before it goes public. I got tired of managing spreadsheets and decided that it could be simpler and more automated. The core idea is simple: one place to track every build…

https://www.instagram.com/reel/DWAuW40jAR_/?igsh=MW1jNDdoYzllMGFmMA== I’ve spent a few overly caffeinated days bouncing between modelling environments, different combinations of operations, tools.. subtle differences in how the coffee is brewed. In short… • Building Iso Curves in Sketch. Defining the surface structure and flow • NURBS Surfacing from curves, smooth intentional surface topology. • BRep Face to T-Spline in Form Environment. Org…

Dear looth community/colleagues around the world, During 2023/24 I have developed a digital gauge to measure so-called longitudinal twist of (bass) guitar necks: the LTwist® gauge. Just to be clear, this is about the "cork screw" type of deviation along the length of a neck, not the bow of a neck. I think there is no need to explain how a too severe neck twist can make it difficult or even impossible to set up a stringed instrument (guita…

I just opened a repair shop and the first repair was to remove a broken 1/8" hex wrench ball end from the truss rod nut of a Turner RB4 Renaissance Bass. I read of all sorts of theories on how to extract/remove. None of them had recorded actual attempts of the theories. There's probably others on here but I haven't found them. The ball end was loose and mangled at the rear of the nut sleeve. I tried fairly benign methods first. Heat…

About: I have created an Add-On for blender that at the moment generates fret positions and makes a fretboard according to several parameters. This makes it extremely easy to get started with modeling a Guitar in blender. If you are interested it please give it a whirl and let me know what you think about it and if you like it, what you don't, what you would like to see etc... If you do like it and would like aid its development please d…

https://youtu.be/hwuFgq64mT4?si=NHJmgg12q2EL-D41&t=23 I was checking out this video from Warmoth and that fancy glue shooter caught my eye. After some brief amazon sleuthing I found something similar for surprisingly not as much as I thought it would cost. https://www.amazon.com/dp/B098R7ZWP9/?coliid=I2RE7GKODJQXD4&colid=14B0Z9NCO74LW&ref_=list_c_wl_lv_ov_lig_dp_it&th=1 Looks like the above link is entry level with some fancier units in t…

I used to run a cnc punch press at a machine shop. It was a Trumpf. For some reason the brand just showed up on my Instagram and I checked it out. Apparently they make printers that print metal powder. @member are you ready for the next level? Might be interesting for custom hardware. https://www.trumpf.com/en_INT/products/machines-systems/additive-production-systems/truprint-1000/

Not sure if this is the best place for this, but whatever. I need somebody to check my logic here--I could be completely wrong in my thinking. I'm about to start up my new shop in Ireland, and the humidity/temperature situation is VERY different than the Greater Washington DC region. I will also be unlikely to have as complete control over temperature and humidity as I did in our extremely tight, air-conditioned house in the US. I also k…

Not exactly 3D Printing but it’s the closest sub-category. After backing an Indiegogo project back in August, my Seal Lite finally arrived! My first impression is that this thing is pretty freaking cool. I tested it out after skimming the tutorial (because that’s the true test of interface ) and received halfway decent results. I put maybe 20-25 minutes of use on it this evening, and I’m excited to give it a more proper dive over the wee…